Product introduction
Haomei Aluminum supplies high-quality 6063 aluminum sheet and plate with excellent surface finish, superior corrosion resistance, and outstanding anodizing responsiveness. Widely utilized in architectural extrusions, window frames, doors, and intricate CNC machined components, our 6063 aluminum plates are strictly manufactured compliant with ASTM B209 and EN 485 standards. Available in T5 and T6 tempers with customizable thickness from 0.5mm to 200mm
Specification
|
Alloy |
6063 aluminum sheet plate |
|
Temper |
F,O,T4,T6,T651,etc. |
|
Thickness (mm) |
0.30-500 |
|
Width (mm) |
500-2650 |
|
Length (mm) |
500-16000 |
|
Package |
Export packaging (protective film, interleaved paper) |
|
Application |
Automobile, truck wheel hub, mobile phone casing, precision mold, etc. |
Chemical Composition %
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Zr |
Others |
AL |
|
|
6063 |
0.60 |
0.35 |
0.10 |
0.10 |
0.90 |
0.10 |
0.10 |
0.10 |
- |
Single |
Total |
Balance |
|
0.05 |
0.15 |
|||||||||||
Mechanical properties:
|
Alloy |
Temper |
Tensile Strength Rm(Mpa) |
Yield Strength Rp0.2(Mpa) |
Elongation A(%) |
Hardness |
|
6063 |
T5 |
186 |
145 |
12 |
60 |
|
T6 |
241 |
214 |
12 |
73 |
Thickness Tolerance Chart
| Gauge | LB/Sq. Ft. | LB/Sq In. | Plate Gauge Tolerance | ||
|---|---|---|---|---|---|
| 72″ Wide | 96″ Wide | ||||
| 3/16 | 0.1875 | 8.579 | 0.05958 | +.045″ -.010″ | +.050″ -.010″ |
| 7/32 | 0.2187 | 9.870 | 0.06854 | ||
| 1/4 | 0.2500 | 11.162 | 0.07750 | ||
| 5/16 | 0.3125 | 13.746 | 0.09546 | ||
| 3/8 | 0.3750 | 16.496 | 0.11456 | +.055″ -.010″ | +.060″ -.010″ |
| 7/16 | 0.4375 | 19.080 | 0.13250 | ||
| 1/2 | 0.5000 | 21.633 | 0.15044 | ||
| 9/16 | 0.5625 | 24.247 | 0.16838 | ||
| 5/8 | 0.6250 | 26.831 | 0.18633 | ||
| 11/16 | 0.6875 | 29.415 | 0.20427 | ||
| 3/4 | 0.7500 | 32.123 | 0.22308 | +.060″ -.010″ | +.065″ -.010″ |
| 13/16 | 0.8125 | 34.707 | 0.24102 | ||
| 7/8 | 0.8750 | 37.291 | 0.25897 | ||
| 15/16 | 0.9375 | 39.875 | 0.27691 | ||
| 1 | 1.0000 | 42.665 | 0.29628 | +.070″ -.010″ | +.075 -.010″ |
| 1-1/8 | 1.1250 | 47.833 | 0.33217 | ||
| 1-1/4 | 1.2500 | 53.001 | 0.36806 | ||
| 1-3/8 | 1.3750 | 58.169 | 0.40395 | ||
| 1-1/2 | 1.5000 | 63.337 | 0.43984 | ||
| 1-3/4 | 1.7500 | 73.672 | 0.51161 | ||
| 2 | 2.0000 | 84.008 | 0.58339 | +.125″ -.010″ | +.150″ -.010″ |
| 2-1/8 | 2.1250 | 89.610 | 0.62229 | ||
| 2-1/4 | 2.2500 | 94.777 | 0.65817 | ||
| 2-1/2 | 2.5000 | 105.113 | 0.72995 | ||
| 2-3/4 | 2.7500 | 115.449 | 0.80173 | ||
| 3 | 3.0000 | 126.301 | 0.87709 | +.150″ -.010″ | +.160″ -.010″ |
| 3-1/2 | 3.5000 | 146.972 | 1.02064 | ||
| 4 | 4.0000 | 168.264 | 1.16850 | +.180″ -.010″ | +.200″ -.010 |
Thickness Chart In Mm
| Plate Thickness (mm) |
Plate Weight (kg/m2) |
|---|---|
| 2.0 | 15.7 |
| 1.6 | 12.6 |
| 3 | 23.6 |
| 2.5 | 19.6 |
| 3.2 | 25.1 |
| 5 | 39.3 |
| 4 | 31.4 |
| 6 | 47.1 |
| 10 | 78.5 |
| 8 | 62.8 |
| 12.5 | 98.1 |
| 20 | 157 |
| 15 | 118 |
| 22.5 | 177 |
| 30 | 236 |
| 25 | 196 |
| 32 | 251 |
| 40 | 314 |
| 35 | 275 |
| 45 | 353 |
| 55 | 432 |
| 50 | 393 |
| 60 | 471 |
| 70 | 550 |
| 65 | 510 |
| 75 | 589 |
| 250 | 1963 |
| 90 | 707 |
| 80 | 628 |
| 150 | 1178 |
| 100 | 785 |
| 120 | 942 |
| 110 | 864 |
| 130 | 1051 |
| 180 | 1413 |
| 160 | 1256 |
| 200 | 1570 |
Thickness Tolerance
Plate Width (w), in. [mm] |
||||
|---|---|---|---|---|
| Specified Thickness (t), in. [mm] | w > 144 [ 3658] | 84 [2134] < w ≤ 120 [3048] | w ≤ 84 [2134] | 120 [3048] < w ≤ 144 [3658] |
|
Tolerance Over Specified Thickness, *** in. [mm]
|
||||
| 3/4 [19.05] ≤ t < 1 [25.04] | 0.100 [2.54] | 0.065 [1.65] | 0.060 [1.52] | 0.085 [2.16] |
| 8 [203.2] ≤ t < 10 [254.0] | 0.550 [14.0] | 0.335 [8.50] | 0.315 [8.00] | 0.435 [11.0] |
| 2 [ 50.80] ≤ t < 3 [76.20] | 0.200 [5.08] | 0.150[3.80] | 0.125 [3.20] | 0.175 [4.45] |
| 3/16 [4.76] ≤ t < 3/8 [9.52] | -- | 0.050 [1.27] | 0.045 [1.14] | 0.085 [2.16] |
| t < 3/16 [4.76] | -- | 0.070 [1.78] | 0.055 [1.35] | -- |
| 1 [25.40] ≤ t < 2 [50.80] | 0.115 [2.92] | 0.075 [1.90] | 0.070 [1.78] | 0.095[2.41] |
| 4 [101.6] ≤ t < 6 [152.4] | 0.355 [9.02] | 0.200 [5.08] | 0.180 [4.75] | 0.335 [8.50] |
| 3 [76.20] ≤ t < 4 [101.6] | 0.225 [5.72] | 0.160 [4.06] | 0.150 [3.81] | 0.200 [5.08] |
| 6 [152.4] ≤ t < 8 [203.2] | 0.435 [11.0] | 0.255 [6.48] | 0.235 [6.00] | 0.355 [9.02] |
Standard Size Chart
| 2000MM X 1000MM X 3MM | 2000MM X 1000MM X 6MM |
| 2500MM X 1250MM X 4MM | 2500MM X 1250MM X 8MM |
| 3000MM X 1500MM X 3MM | 3000MM X 1500MM X 6MM |
| 3000MM X 1500MM X 4MM | 3000MM X 1500MM X 8MM |
| 2000MM X 1000MM X 5MM | 2500MM X 1250MM X 10MM |
| 2500MM X 1250MM X 3MM | 2500MM X 1250MM X 6MM |
| 4000MM X 2000MM X 3MM | 4000MM X 2000MM X 6MM |
| 2500MM X 1250MM X 5MM | 3000MM X 1500MM X 10MM |
| 2000MM X 1000MM X 4MM | 2000MM X 1000MM X 8MM |
| 4000MM X 2000MM X 4MM | 2000MM X 2000MM X 10MM |
| 3000MM X 1500MM X 5MM |
Features
6063 aluminum plate has strong corrosion resistance, no tendency of stress corrosion cracking, excellent welding performance, and the corrosion performance in the welding area remains unchanged.
● 6063 aluminum plate can be oxidized, the color and luster will not change after surface anodic oxidation treatment, and the appearance is beautiful.
● The surface of the 6063 aluminum plate has no peeling, air bubbles, surface roughness and local mechanical damage, and the surface of the aluminum plate has no defects.
Application
6063 aluminum plate: used for automobile floor plates, auto parts, mobile phone accessories, etc.
6063 aluminum medium and thick plate: used for automobile wheel hub, mold, structural parts of passenger car body, etc.
6063 aluminum plate is mainly used to make the overall outline of the car body and the body of the tanker. As a high aluminum magnesium alloy, 6063 is a non-heat-treatable alloy with good strength, corrosion resistance, and good machinability. It can be used to manufacture aircraft fuel tanks, oil pipes, transportation vehicles, ships, etc. 6063 aluminum sheet can be used in various fields. In automobile manufacturing, it can be used as raw material for processing and manufacturing of car body parts, and can also be used as processing material for tank car body; in the field of construction, it can be used as decorative plate, anti-corrosion plate, and can also be used for deep processing.
FAQ
-
Q1: What is the main difference between 6061 and 6063 aluminum sheets?
-
A: 6061 has higher strength and is better for structural components (heavy-duty applications), while 6063 has a superior surface finish and higher corrosion resistance, making it the premier choice for architectural and anodizing applications.
-
-
Q2: Can Haomei provide 6063 aluminum plate with double-side protective PVC film?
-
A: Yes, we offer laser PVC film or standard blue protective film on one or both sides to guarantee a scratch-free surface during your fabrication and laser cutting process.
-
-
Q3: What quality certificates accompany the 6063 aluminum plate shipment?
-
A: Each batch is delivered with a complete Mill Test Certificate (MTC) specifying the chemical composition, tensile strength, and compliance with ASTM B209 / EN 485 international standards.
-
